219 research outputs found
W-Band Pancharatnam Half Wave Plate Based on Negative Refractive Index Metamaterials
Electromagnetic metamaterials, made from arrangements of subwavelength sized
structures, can be used to manipulate radiation. Designing metamaterials that
have a positive refractive index along one axis and a negative refractive index
along the orthogonal axis can result in birefringences, . The
effect can be used to create wave plates with subwavelength thicknesses.
Previous attempts at making wave plates in this way have resulted in very
narrow usable bandwidths. In this paper, we use the Pancharatnam method to
increase the usable bandwidth. A combination of Finite Element Method and
Transmission Line models were used to optimise the final design. Experimental
results are compared to the modelled data.Comment: 7 pages, 10 figures. Accepted on 2014-02-18 for publication in
Applied Optics. This paper is made available as an electronic reprint with
the permission of OS
Modeling the electromagnetic properties of the SCUBA-2 detectors
SCUBA-2 is the next-generation replacement for SCUBA (Sub-millimetre Common
User Bolometer Array) on the James Clerk Maxwell Telescope. Operating at 450
and 850 microns, SCUBA-2 fills the focal plane of the telescope with
fully-sampled, monolithic bolometer arrays. Each SCUBA-2 pixel uses a
quarter-wave slab of silicon with an implanted resistive layer and backshort as
an absorber and a superconducting transition edge sensor as a thermometer. In
order to verify and optimize the pixel design, we have investigated the
electromagnetic behaviour of the detectors, using both a simple
transmission-line model and Ansoft HFSS, a finite-element electromagnetic
simulator. We used the transmission line model to fit transmission measurements
of doped wafers and determined the correct implant dose for the absorbing
layer. The more detailed HFSS modelling yielded some unexpected results which
led us to modify the pixel design. We also verified that the detectors suffered
little loss of sensitivity for off-axis angles up to about 30 degrees.Comment: 13 pages, 14 figures, SPIE Glasgow 21-25 June 2004, Conference 549
A modular spiral phase plate design for orbital angular momentum generation at millimetre wavelengths
Proof of concept measurements of a modular spiral phase plate design able to generate millimetre wavelength beams with an azimuthal mode number of l = ±10 are presented. The plate is comprised of ten single modules that interlock to create the full plate assembly, allowing improved machining accuracy compared to standard techniques. Therefore, this design could be used in millimetre wavelength systems that require the manipulation of large OAM modes. The plate was manufactured from polypropylene (index of refraction n ≈ 1.5), and was measured at 100GHz. A three dimensional field scanner was used to measure three near field surfaces behind the plate. Intensity measurements showed the expected OAM intensity ring, and phase measurements showed ten phase dislocations, implying proper functionality
Removing beam asymmetry bias in precision CMB temperature and polarisation experiments
Asymmetric beams can create significant bias in estimates of the power
spectra from CMB experiments. With the temperature power spectrum many orders
of magnitude stronger than the B-mode power spectrum any systematic error that
couples the two must be carefully controlled and/or removed. Here, we derive
unbiased estimators for the CMB temperature and polarisation power spectra
taking into account general beams and general scan strategies. A simple
consequence of asymmetric beams is that, even with an ideal scan strategy where
every sky pixel is seen at every orientation, there will be residual coupling
from temperature power to B-mode power if the orientation of the beam asymmetry
is not aligned with the orientation of the co-polarisation. We test our
correction algorithm on simulations of two temperature-only experiments and
demonstrate that it is unbiased. The simulated experiments use realistic scan
strategies, noise levels and highly asymmetric beams. We also develop a
map-making algorithm that is capable of removing beam asymmetry bias at the map
level. We demonstrate its implementation using simulations and show that it is
capable of accurately correcting both temperature and polarisation maps for all
of the effects of beam asymmetry including the effects of temperature to
polarisation leakage.Comment: 18 pages, 9 figure
Experimental realization of an achromatic magnetic mirror based on metamaterials
Our work relates to the use of metamaterials engineered to realize a meta-surface approaching the exotic properties of an ideal object not observed in nature, a ‘magnetic mirror’. Previous realizations were based on resonant structures which implied narrow bandwidths and large losses. The working principle of our device is ideally frequency-independent, it does not involve resonances and it does not rely on a specific technology. The performance of our prototype, working at millimetre wavelengths, has never been achieved before and it is superior to any other device reported in the literature, both in the microwave and optical regions. The device inherently has large bandwidth (144%), low losses (<1 %) and is almost independent of incidence-angle and polarization-state and thus approaches the behaviour of an ideal magnetic mirror. Applications of magnetic mirrors range from low-profile antennas, absorbers to optoelectronic devices. Our device can be realised using different technologies to operate in other spectral regions
Removing beam asymmetry bias in precision CMB temperature and polarisation experiments
Asymmetric beams can create significant bias in estimates of the power
spectra from CMB experiments. With the temperature power spectrum many orders
of magnitude stronger than the B-mode power spectrum any systematic error that
couples the two must be carefully controlled and/or removed. Here, we derive
unbiased estimators for the CMB temperature and polarisation power spectra
taking into account general beams and general scan strategies. A simple
consequence of asymmetric beams is that, even with an ideal scan strategy where
every sky pixel is seen at every orientation, there will be residual coupling
from temperature power to B-mode power if the orientation of the beam asymmetry
is not aligned with the orientation of the co-polarisation. We test our
correction algorithm on simulations of two temperature-only experiments and
demonstrate that it is unbiased. The simulated experiments use realistic scan
strategies, noise levels and highly asymmetric beams. We also develop a
map-making algorithm that is capable of removing beam asymmetry bias at the map
level. We demonstrate its implementation using simulations and show that it is
capable of accurately correcting both temperature and polarisation maps for all
of the effects of beam asymmetry including the effects of temperature to
polarisation leakage.Comment: 18 pages, 9 figure
A NEW BROADBAND MICROSTRIP QUADRATURE HYBRID WITH VERY FLAT PHASE RESPONSE
A new broadband microstrip branch-line quadrature hybrid with very flat phase response is presented. The device is made by cascading four branch-line couplers with arbitrary power division. The novel design is based on the microstrip transposition of a broadband waveguide polariser [4]. Across a 32% bandwidth centred at 9.3 GHz, the RL and the IL are respectively -15 dB and -3 dB/-4 dB; the phase difference is very flat, i.e. 90°±1.5°
Variation in reported human head tissue electrical conductivity values
Electromagnetic source characterisation requires accurate volume conductor models representing head geometry and the electrical conductivity field. Head tissue conductivity is often assumed from previous literature, however, despite extensive research, measurements are inconsistent. A meta-analysis of reported human head electrical conductivity values was therefore conducted to determine significant variation and subsequent influential factors. Of 3121 identified publications spanning three databases, 56 papers were included in data extraction. Conductivity values were categorised according to tissue type, and recorded alongside methodology, measurement condition, current frequency, tissue temperature, participant pathology and age. We found variation in electrical conductivity of the whole-skull, the spongiform layer of the skull, isotropic, perpendicularly- and parallelly-oriented white matter (WM) and the brain-to-skull-conductivity ratio (BSCR) could be significantly attributed to a combination of differences in methodology and demographics. This large variation should be acknowledged, and care should be taken when creating volume conductor models, ideally constructing them on an individual basis, rather than assuming them from the literature. When personalised models are unavailable, it is suggested weighted average means from the current meta-analysis are used. Assigning conductivity as: 0.41 S/m for the scalp, 0.02 S/m for the whole skull, or when better modelled as a three-layer skull 0.048 S/m for the spongiform layer, 0.007 S/m for the inner compact and 0.005 S/m for the outer compact, as well as 1.71 S/m for the CSF, 0.47 S/m for the grey matter, 0.22 S/m for WM and 50.4 for the BSCR
Correction to: Variation in reported human head tissue electrical conductivity values
Correction to: Brain Topography (2019) 32:825–858 https://doi.org/10.1007/s10548-019-00710-
- …